[Tikzdevice-bugs] [R-Forge] tikzDevice 0.4.5

[Kurt Hornik]

>>>>> Cameron Bracken writes:

> We obviously have a bit more work to do, I will resubmit when all these
> warnings are fixed. Thanks for your patience.
> -Cameron

Sure.

Best
-k

> --
> Cameron Bracken
> Graduate Research Assistant
> CADSWES
> University of Colorado at Boulder
> cameron.bracken at colorado.edu
> Cell - 925.548.7392
> Work - 303.735.1180


> On Wed, Aug 19, 2009 at 1:12 PM, Kurt Hornik <Kurt.Hornik at wu.ac.at> wrote:

>> >>>>> Cameron Bracken writes:
>> 
>> > The output you show now matches what we get.  I did notice one small
>> > noncritical typo giving the "* checking Rd \usage sections" warning.
>> > This can be easily fixed. Otherwise, despite our best attempts we have
>> > not been able to resolve the other warnings.  We have tested on
>> > windows mac and linux and have not observed any unsatisfactory
>> > behavior.  Otherwise all the other steps before submitting have been
>> > completed successfully (such as running R CMD Rd2dvi).
>> 
>> I am not sure about the "no unsatisfactory behavior" part: there should
>> be no warnings (or errors) when running R CMD check.
>> 
>> Some of the warnings occur because loading the package produces output
>> which can not be suppressed.  More precisely:
>> 
R> suppressWarnings(system(paste(Sys.getenv("R_LATEXCMD"), "--version")))
>> pdfTeX using libpoppler 3.141592-1.40.3-2.2 (Web2C 7.5.6)
>> kpathsea version 3.5.6
>> Copyright 2007 Peter Breitenlohner (eTeX)/Han The Thanh (pdfTeX).
>> Kpathsea is copyright 2007 Karl Berry and Olaf Weber.
>> There is NO warranty.  Redistribution of this software is
>> covered by the terms of both the pdfTeX using libpoppler copyright and
>> the Lesser GNU General Public License.
>> For more information about these matters, see the file
>> named COPYING and the pdfTeX using libpoppler source.
>> Primary author of pdfTeX using libpoppler: Peter Breitenlohner (eTeX)/Han
>> The Thanh (pdfTeX).
>> Kpathsea written by Karl Berry, Olaf Weber, and others.
>> 
>> Compiled with libpng 1.2.35; using libpng 1.2.38
>> Compiled with zlib 1.2.3.3; using zlib 1.2.3.3
>> Compiled with libpoppler version 0.10.5
>> 
>> because latex && friends have --version write to stdout (and return 0).
>> 
>> You either need to suppress output (not using sink(): use the equiv of
>> latex --version > /dev/null) or come up with a better test.  In fact, I
>> am not quite sure what you are trying to achieve using the latex
>> --version test: in principle any GNU coding standard compliant program
>> will honor --version and return 0 when called with --version.  Hence, I
>> think you could simply use Sys.which() to find the appropriate LaTeX
>> executable from the candidates.
>> 
>> Redirecting leaves
>> 
>> * checking Rd files ... WARNING
>> Warning: ./man/tikz.Rd:87: Unnecessary braces at ‘{\code{tikzLatex}}’
>> Warning: ./man/tikz.Rd:87: Unnecessary braces at ‘{ Specifies the location
>> of the LaTeX compiler to be used by \pkg{tikzDevice}. Setting this option
>> may help the package locate a missing compiler. The default is searched for
>> when the package is loaded, otherwise it can be set manually.   This option
>> may be set as follows: \code{options( tikzLatex = '/path/to/latex/compiler'
>> )}.}’
>> Warning: ./man/tikz.Rd:89: Unnecessary braces at
>> ‘{\code{tikzMetricsDictionary}}’
>> Warning: ./man/tikz.Rd:89: Unnecessary braces at ‘{ When using the graphics
>> device provided by \pkg{tikzDevice}, you may notice that \R\ appears to
>> ``lag" or ``hang" when commands such as \code{plot()} are executed. This is
>> because the device must query the LaTeX compiler for string widths and font
>> metrics. For a normal plot, this may happen dozens or hundreds of times-
>> hence \R\ becomes unresponsive for a while. The good news is that the
>> \code{tikz()} code is designed to cache the results of these computations so
>> they need only be performed once for each string or character. By default,
>> these values are stored in a temporary cache file which is deleted when \R\
>> is shut down. A location for a permanent cache file may be specified by
>> setting the value of \code{tikzMetricsDictionary} in \code{.Rprofile} with
>> \code{options( tikzMetricsDictionary = '/path/to/dictionary/location' )}.}’
>> Warning: ./man/tikz.Rd:91: Unnecessary braces at
>> ‘{\code{tikzDocumentDeclaration}}’
>> Warning: ./man/tikz.Rd:91-96: Unnecessary braces at ‘{A string. The
>> documentclass declaration when \code{standAlone == TRUE} as well. as when
>> font metrics are calculated. The default value is:
>> \preformatted{
>> options( tikzDocumentDeclaration = "\documentclass{article}" )
>> 
>> 
>> }}’
>> Warning: ./man/tikz.Rd:98: Unnecessary braces at ‘{\code{tikzFooter}}’
>> Warning: ./man/tikz.Rd:98-103: Unnecessary braces at ‘{A character vector.
>> The footer to be used only when \code{standAlone==TRUE}. The default value
>> is:
>> \preformatted{
>> options( tikzFooter = c( "\end{document}" ) )
>> 
>> 
>> }}’
>> Warning: ./man/tikz.Rd:105: Unnecessary braces at
>> ‘{\code{tikzLatexPackages}}’
>> Warning: ./man/tikz.Rd:105-115: Unnecessary braces at ‘{ A character
>> vector. These are the packages which are included when using the
>> \code{standAlone} option as well as when font metric are calculated. The
>> default value is:
>> \preformatted{
>> options( tikzLatexPackagesDefault = c(
>> "\usepackage{tikz}",
>> "\usepackage[active,tightpage]{preview}",
>> "\PreviewEnvironment{pgfpicture}",
>> "\setlength\PreviewBorder{0pt}") )
>> 
>> 
>> }
>> }’
>> Warning: ./man/tikz.Rd:117: Unnecessary braces at
>> ‘{\code{tikzMetricPackages}}’
>> Warning: ./man/tikz.Rd:117-125: Unnecessary braces at ‘{ A character
>> vector. These are the packages which are additionally loaded when doing font
>> metric calculations.  As you see below, the font encoding is set to Type 1.
>> This is very important so that character codes of LaTeX and \R\ match up.
>> The default value is:
>> \preformatted{
>> options( tikzMetricPackages = c(
>> "\usepackage[utf8]{inputenc}",
>> "\usepackage[T1]{fontenc}",
>> "\usetikzlibrary{calc}"))
>> 
>> 
>> }}’
>> * checking Rd cross-references ... OK
>> * checking for missing documentation entries ... OK
>> * checking for code/documentation mismatches ... OK
>> * checking Rd \usage sections ... WARNING
>> Bad \usage lines found in documentation object 'tikz':
>> tikz(file = "Rplots.tex", width = 7, height = 7,
>> bg="white", fg="black", standAlone = FALSE, bareBones = FALSE,
>> documentDeclaration = getOption("tikzDocumentDeclaration"),
>> packages = getOption("tikzLatexPackages"),
>> footer = getOption("tikzFooter")))
>> 
>> Functions with \usage entries need to have the appropriate \alias entries,
>> and all their arguments documented.
>> The \usage entries must correspond to syntactically valid R code.
>> See the chapter 'Writing R documentation files' in manual 'Writing R
>> Extensions'.
>> 
>> * checking package vignettes in 'inst/doc' ... NOTE
>> This is pdfTeXk, Version 3.141592-1.40.3 (Web2C 7.5.6)
>> %&-line parsing enabled.
>> entering extended mode
>> ! I can't write on file `texput.log'.
>> Please type another transcript file name>
>> * checking PDF version of manual ... OK
>> 
>> 
>> (and I have no idea about the texput.log message.)
>> 
>> -k
>> 
>> 
>> 
>> 
>> > -Cameron
>> 
>> 
>> 
>> > On Mon, Aug 10, 2009 at 8:10 AM, Kurt Hornik <Kurt.Hornik at wu.ac.at>
>> wrote:
>> 
>> >> >>>>> Cameron Bracken writes:
>> >>
>> >> > I do not get this error, nor is this present on R-forge. I strongly
>> >> suspect
>> >> > that it is a problem with missing LaTeX packages when building the
>> >> vignette.
>> >> > I cannot tell exactly which one because the errors are very
>> >> > cryptic.  The LaTeX packages on which out vignette depends are:
>> >> > couriers
>> >> > hyperref
>> >> > ulem
>> >> > tikz (version 2.00)
>> >> > parskip
>> >> > geometry
>> >> > epigraph
>> >> > multicol
>> >> > graphicx
>> >> > float
>> >> > natbib
>> >>
>> >> I rechecked with r-release, with basically the same results, see below.
>> >>
>> >> You're saying you're not getting the warnings?
>> >>
>> >> -k
>> >>
>> >> * using log directory '/home/Hornik/tmp/CRAN/ZZZ/tikzDevice.Rcheck'
>> >> * using R version 2.9.1 Patched (2009-08-07 r49108)
>> >> * using session charset: UTF-8
>> >> * checking for file 'tikzDevice/DESCRIPTION' ... OK
>> >> * checking extension type ... Package
>> >> * this is package 'tikzDevice' version '0.4.5'
>> >> * checking package name space information ... OK
>> >> * checking package dependencies ... OK
>> >> * checking if this is a source package ... OK
>> >> * checking for executable files ... OK
>> >> * checking whether package 'tikzDevice' can be installed ... OK
>> >> * checking package directory ... OK
>> >> * checking for portable file names ... OK
>> >> * checking for sufficient/correct file permissions ... OK
>> >> * checking DESCRIPTION meta-information ... OK
>> >> * checking top-level files ... OK
>> >> * checking index information ... OK
>> >> * checking package subdirectories ... OK
>> >> * checking R files for non-ASCII characters ... OK
>> >> * checking R files for syntax errors ... OK
>> >> * checking whether the package can be loaded ... OK
>> >> * checking whether the package can be loaded with stated dependencies
>> ...
>> >> OK
>> >> * checking whether the name space can be loaded with stated dependencies
>> >> ... OK
>> >> * checking for unstated dependencies in R code ... WARNING
>> >> pdfTeX using libpoppler 3.141592-1.40.3-2.2 (Web2C 7.5.6)
>> >> kpathsea version 3.5.6
>> >> Copyright 2007 Peter Breitenlohner (eTeX)/Han The Thanh (pdfTeX).
>> >> Kpathsea is copyright 2007 Karl Berry and Olaf Weber.
>> >> There is NO warranty.  Redistribution of this software is
>> >> covered by the terms of both the pdfTeX using libpoppler copyright and
>> >> the Lesser GNU General Public License.
>> >> For more information about these matters, see the file
>> >> named COPYING and the pdfTeX using libpoppler source.
>> >> Primary author of pdfTeX using libpoppler: Peter Breitenlohner
>> (eTeX)/Han
>> >> The Thanh (pdfTeX).
>> >> Kpathsea written by Karl Berry, Olaf Weber, and others.
>> >>
>> >> Compiled with libpng 1.2.35; using libpng 1.2.38
>> >> Compiled with zlib 1.2.3.3; using zlib 1.2.3.3
>> >> Compiled with libpoppler version 0.10.5
>> >>
>> >> See the information on DESCRIPTION files in the chapter 'Creating R
>> >> packages' of the 'Writing R Extensions' manual.
>> >> * checking S3 generic/method consistency ... WARNING
>> >> pdfTeX using libpoppler 3.141592-1.40.3-2.2 (Web2C 7.5.6)
>> >> kpathsea version 3.5.6
>> >> Copyright 2007 Peter Breitenlohner (eTeX)/Han The Thanh (pdfTeX).
>> >> Kpathsea is copyright 2007 Karl Berry and Olaf Weber.
>> >> There is NO warranty.  Redistribution of this software is
>> >> covered by the terms of both the pdfTeX using libpoppler copyright and
>> >> the Lesser GNU General Public License.
>> >> For more information about these matters, see the file
>> >> named COPYING and the pdfTeX using libpoppler source.
>> >> Primary author of pdfTeX using libpoppler: Peter Breitenlohner
>> (eTeX)/Han
>> >> The Thanh (pdfTeX).
>> >> Kpathsea written by Karl Berry, Olaf Weber, and others.
>> >>
>> >> Compiled with libpng 1.2.35; using libpng 1.2.38
>> >> Compiled with zlib 1.2.3.3; using zlib 1.2.3.3
>> >> Compiled with libpoppler version 0.10.5
>> >>
>> >> See section 'Generic functions and methods' of the 'Writing R
>> Extensions'
>> >> manual.
>> >> * checking replacement functions ... WARNING
>> >> pdfTeX using libpoppler 3.141592-1.40.3-2.2 (Web2C 7.5.6)
>> >> kpathsea version 3.5.6
>> >> Copyright 2007 Peter Breitenlohner (eTeX)/Han The Thanh (pdfTeX).
>> >> Kpathsea is copyright 2007 Karl Berry and Olaf Weber.
>> >> There is NO warranty.  Redistribution of this software is
>> >> covered by the terms of both the pdfTeX using libpoppler copyright and
>> >> the Lesser GNU General Public License.
>> >> For more information about these matters, see the file
>> >> named COPYING and the pdfTeX using libpoppler source.
>> >> Primary author of pdfTeX using libpoppler: Peter Breitenlohner
>> (eTeX)/Han
>> >> The Thanh (pdfTeX).
>> >> Kpathsea written by Karl Berry, Olaf Weber, and others.
>> >>
>> >> Compiled with libpng 1.2.35; using libpng 1.2.38
>> >> Compiled with zlib 1.2.3.3; using zlib 1.2.3.3
>> >> Compiled with libpoppler version 0.10.5
>> >>
>> >> In R, the argument of a replacement function which corresponds to the
>> right
>> >> hand side must be named 'value'.
>> >> * checking foreign function calls ... WARNING
>> >> pdfTeX using libpoppler 3.141592-1.40.3-2.2 (Web2C 7.5.6)
>> >> kpathsea version 3.5.6
>> >> Copyright 2007 Peter Breitenlohner (eTeX)/Han The Thanh (pdfTeX).
>> >> Kpathsea is copyright 2007 Karl Berry and Olaf Weber.
>> >> There is NO warranty.  Redistribution of this software is
>> >> covered by the terms of both the pdfTeX using libpoppler copyright and
>> >> the Lesser GNU General Public License.
>> >> For more information about these matters, see the file
>> >> named COPYING and the pdfTeX using libpoppler source.
>> >> Primary author of pdfTeX using libpoppler: Peter Breitenlohner
>> (eTeX)/Han
>> >> The Thanh (pdfTeX).
>> >> Kpathsea written by Karl Berry, Olaf Weber, and others.
>> >>
>> >> Compiled with libpng 1.2.35; using libpng 1.2.38
>> >> Compiled with zlib 1.2.3.3; using zlib 1.2.3.3
>> >> Compiled with libpoppler version 0.10.5
>> >>
>> >> See the chapter 'System and foreign language interfaces' of the 'Writing
>> R
>> >> Extensions' manual.
>> >> * checking R code for possible problems ... NOTE
>> >> pdfTeX using libpoppler 3.141592-1.40.3-2.2 (Web2C 7.5.6)
>> >> kpathsea version 3.5.6
>> >> Copyright 2007 Peter Breitenlohner (eTeX)/Han The Thanh (pdfTeX).
>> >> Kpathsea is copyright 2007 Karl Berry and Olaf Weber.
>> >> There is NO warranty.  Redistribution of this software is
>> >> covered by the terms of both the pdfTeX using libpoppler copyright and
>> >> the Lesser GNU General Public License.
>> >> For more information about these matters, see the file
>> >> named COPYING and the pdfTeX using libpoppler source.
>> >> Primary author of pdfTeX using libpoppler: Peter Breitenlohner
>> (eTeX)/Han
>> >> The Thanh (pdfTeX).
>> >> Kpathsea written by Karl Berry, Olaf Weber, and others.
>> >>
>> >> Compiled with libpng 1.2.35; using libpng 1.2.38
>> >> Compiled with zlib 1.2.3.3; using zlib 1.2.3.3
>> >> Compiled with libpoppler version 0.10.5
>> >>
>> >> queryMetricsDictionary: no visible binding for global variable
>> >> ‘dictionary’
>> >> pdfTeX using libpoppler 3.141592-1.40.3-2.2 (Web2C 7.5.6)
>> >> kpathsea version 3.5.6
>> >> Copyright 2007 Peter Breitenlohner (eTeX)/Han The Thanh (pdfTeX).
>> >> Kpathsea is copyright 2007 Karl Berry and Olaf Weber.
>> >> There is NO warranty.  Redistribution of this software is
>> >> covered by the terms of both the pdfTeX using libpoppler copyright and
>> >> the Lesser GNU General Public License.
>> >> For more information about these matters, see the file
>> >> named COPYING and the pdfTeX using libpoppler source.
>> >> Primary author of pdfTeX using libpoppler: Peter Breitenlohner
>> (eTeX)/Han
>> >> The Thanh (pdfTeX).
>> >> Kpathsea written by Karl Berry, Olaf Weber, and others.
>> >>
>> >> Compiled with libpng 1.2.35; using libpng 1.2.38
>> >> Compiled with zlib 1.2.3.3; using zlib 1.2.3.3
>> >> Compiled with libpoppler version 0.10.5
>> >>
>> >> * checking Rd files ... OK
>> >> * checking Rd files against version 2 parser ... OK
>> >> * checking Rd cross-references ... OK
>> >> * checking for missing documentation entries ... WARNING
>> >> pdfTeX using libpoppler 3.141592-1.40.3-2.2 (Web2C 7.5.6)
>> >> kpathsea version 3.5.6
>> >> Copyright 2007 Peter Breitenlohner (eTeX)/Han The Thanh (pdfTeX).
>> >> Kpathsea is copyright 2007 Karl Berry and Olaf Weber.
>> >> There is NO warranty.  Redistribution of this software is
>> >> covered by the terms of both the pdfTeX using libpoppler copyright and
>> >> the Lesser GNU General Public License.
>> >> For more information about these matters, see the file
>> >> named COPYING and the pdfTeX using libpoppler source.
>> >> Primary author of pdfTeX using libpoppler: Peter Breitenlohner
>> (eTeX)/Han
>> >> The Thanh (pdfTeX).
>> >> Kpathsea written by Karl Berry, Olaf Weber, and others.
>> >>
>> >> Compiled with libpng 1.2.35; using libpng 1.2.38
>> >> Compiled with zlib 1.2.3.3; using zlib 1.2.3.3
>> >> Compiled with libpoppler version 0.10.5
>> >>
>> >> All user-level objects in a package should have documentation entries.
>> >> See the chapter 'Writing R documentation files' in manual 'Writing R
>> >> Extensions'.
>> >> * checking for code/documentation mismatches ... WARNING
>> >> pdfTeX using libpoppler 3.141592-1.40.3-2.2 (Web2C 7.5.6)
>> >> kpathsea version 3.5.6
>> >> Copyright 2007 Peter Breitenlohner (eTeX)/Han The Thanh (pdfTeX).
>> >> Kpathsea is copyright 2007 Karl Berry and Olaf Weber.
>> >> There is NO warranty.  Redistribution of this software is
>> >> covered by the terms of both the pdfTeX using libpoppler copyright and
>> >> the Lesser GNU General Public License.
>> >> For more information about these matters, see the file
>> >> named COPYING and the pdfTeX using libpoppler source.
>> >> Primary author of pdfTeX using libpoppler: Peter Breitenlohner
>> (eTeX)/Han
>> >> The Thanh (pdfTeX).
>> >> Kpathsea written by Karl Berry, Olaf Weber, and others.
>> >>
>> >> Compiled with libpng 1.2.35; using libpng 1.2.38
>> >> Compiled with zlib 1.2.3.3; using zlib 1.2.3.3
>> >> Compiled with libpoppler version 0.10.5
>> >>
>> >> pdfTeX using libpoppler 3.141592-1.40.3-2.2 (Web2C 7.5.6)
>> >> kpathsea version 3.5.6
>> >> Copyright 2007 Peter Breitenlohner (eTeX)/Han The Thanh (pdfTeX).
>> >> Kpathsea is copyright 2007 Karl Berry and Olaf Weber.
>> >> There is NO warranty.  Redistribution of this software is
>> >> covered by the terms of both the pdfTeX using libpoppler copyright and
>> >> the Lesser GNU General Public License.
>> >> For more information about these matters, see the file
>> >> named COPYING and the pdfTeX using libpoppler source.
>> >> Primary author of pdfTeX using libpoppler: Peter Breitenlohner
>> (eTeX)/Han
>> >> The Thanh (pdfTeX).
>> >> Kpathsea written by Karl Berry, Olaf Weber, and others.
>> >>
>> >> Compiled with libpng 1.2.35; using libpng 1.2.38
>> >> Compiled with zlib 1.2.3.3; using zlib 1.2.3.3
>> >> Compiled with libpoppler version 0.10.5
>> >>
>> >> pdfTeX using libpoppler 3.141592-1.40.3-2.2 (Web2C 7.5.6)
>> >> kpathsea version 3.5.6
>> >> Copyright 2007 Peter Breitenlohner (eTeX)/Han The Thanh (pdfTeX).
>> >> Kpathsea is copyright 2007 Karl Berry and Olaf Weber.
>> >> There is NO warranty.  Redistribution of this software is
>> >> covered by the terms of both the pdfTeX using libpoppler copyright and
>> >> the Lesser GNU General Public License.
>> >> For more information about these matters, see the file
>> >> named COPYING and the pdfTeX using libpoppler source.
>> >> Primary author of pdfTeX using libpoppler: Peter Breitenlohner
>> (eTeX)/Han
>> >> The Thanh (pdfTeX).
>> >> Kpathsea written by Karl Berry, Olaf Weber, and others.
>> >>
>> >> Compiled with libpng 1.2.35; using libpng 1.2.38
>> >> Compiled with zlib 1.2.3.3; using zlib 1.2.3.3
>> >> Compiled with libpoppler version 0.10.5
>> >>
>> >> * checking Rd \usage sections ... WARNING
>> >> Bad \usage lines found in documentation object 'tikz':
>> >> tikz(file = "Rplots.tex", width = 7, height = 7,
>> >> bg="white", fg="black", standAlone = FALSE, bareBones = FALSE,
>> >> documentDeclaration = getOption("tikzDocumentDeclaration"),
>> >> packages = getOption("tikzLatexPackages"),
>> >> footer = getOption("tikzFooter")))
>> >>
>> >> Functions with \usage entries need to have the appropriate \alias
>> entries,
>> >> and all their arguments documented.
>> >> The \usage entries must correspond to syntactically valid R code.
>> >> See the chapter 'Writing R documentation files' in manual 'Writing R
>> >> Extensions'.
>> >> pdfTeX using libpoppler 3.141592-1.40.3-2.2 (Web2C 7.5.6)
>> >> kpathsea version 3.5.6
>> >> Copyright 2007 Peter Breitenlohner (eTeX)/Han The Thanh (pdfTeX).
>> >> Kpathsea is copyright 2007 Karl Berry and Olaf Weber.
>> >> There is NO warranty.  Redistribution of this software is
>> >> covered by the terms of both the pdfTeX using libpoppler copyright and
>> >> the Lesser GNU General Public License.
>> >> For more information about these matters, see the file
>> >> named COPYING and the pdfTeX using libpoppler source.
>> >> Primary author of pdfTeX using libpoppler: Peter Breitenlohner
>> (eTeX)/Han
>> >> The Thanh (pdfTeX).
>> >> Kpathsea written by Karl Berry, Olaf Weber, and others.
>> >>
>> >> Compiled with libpng 1.2.35; using libpng 1.2.38
>> >> Compiled with zlib 1.2.3.3; using zlib 1.2.3.3
>> >> Compiled with libpoppler version 0.10.5
>> >>
>> >> The \usage entries for S3 methods should use the \method markup and not
>> >> their full name.
>> >> See the chapter 'Writing R documentation files' in manual 'Writing R
>> >> Extensions'.
>> >> * checking line endings in C/C++/Fortran sources/headers ... OK
>> >> * checking line endings in Makefiles ... OK
>> >> * checking for portable use of $BLAS_LIBS ... OK
>> >> * checking examples ... OK
>> >> * checking package vignettes in 'inst/doc' ... NOTE
>> >> pdfTeX using libpoppler 3.141592-1.40.3-2.2 (Web2C 7.5.6)
>> >> kpathsea version 3.5.6
>> >> Copyright 2007 Peter Breitenlohner (eTeX)/Han The Thanh (pdfTeX).
>> >> Kpathsea is copyright 2007 Karl Berry and Olaf Weber.
>> >> There is NO warranty.  Redistribution of this software is
>> >> covered by the terms of both the pdfTeX using libpoppler copyright and
>> >> the Lesser GNU General Public License.
>> >> For more information about these matters, see the file
>> >> named COPYING and the pdfTeX using libpoppler source.
>> >> Primary author of pdfTeX using libpoppler: Peter Breitenlohner
>> (eTeX)/Han
>> >> The Thanh (pdfTeX).
>> >> Kpathsea written by Karl Berry, Olaf Weber, and others.
>> >> Compiled with libpng 1.2.35; using libpng 1.2.38
>> >> Compiled with zlib 1.2.3.3; using zlib 1.2.3.3
>> >> Compiled with libpoppler version 0.10.5
>> >> This is pdfTeXk, Version 3.141592-1.40.3 (Web2C 7.5.6)
>> >> %&-line parsing enabled.
>> >> entering extended mode
>> >> ! I can't write on file `texput.log'.
>> >> Please type another transcript file name>
>> >> * checking PDF version of manual ... OK
>> >>
>>